Wind Energy · 2014 · 324 citations · 14 references
EngineeringComputational EngineeringAerodynamicsComputational Fluid DynamicsFluid DynamicsActuator ModelingExperimental AerodynamicsLarge-eddy SimulationWind Energy SystemsWind Turbine TechnologyWind-tunnel TestingActuator Force ModelingLarge-eddy Simulation ValidationRotor AerodynamicsTip VorticesTurbine AerodynamicsTurbine Blade AerodynamicsWind Tunnel SimulationWind Turbine Aerodynamics
Previous studies have not adequately addressed the optimal selection of grid resolution and force‑projection width for actuator models. The study compares actuator disk and actuator line models for wind‑turbine wakes and investigates how grid resolution and force‑projection width affect their performance. Large‑eddy simulations were performed using both models, varying grid resolution and force‑projection width, and the actuator line results were validated against wind‑tunnel data from NTNU. Coarsening the grid reduces predicted power, while widening the force‑projection width increases it; both models produce similar wake profiles and power within 1 %, with the actuator line capturing blade‑tip vortices but yielding comparable far‑wake predictions, and experimental validation shows good agreement except at high tip speed ratios. © 2014 John Wiley & Sons, Ltd.
Large eddy simulations of the flow through wind turbines have been carried out using actuator disk and actuator line models for the turbine rotor aerodynamics. In this study, we compare the performance of these two models in producing wind turbine wakes. We also examine parameters that strongly affect the performance of these models, namely, grid resolution and the way in which the actuator force is projected onto the flow field. The proper choice of these two parameters has not been adequately addressed in previous works. We see that as the grid is coarsened, the predicted power decreases. As the width of the body force projection function is increased, the predicted power increases. The actuator disk and actuator line models produce similar wake profiles and predict power within 1% of one another when subject to the same uniform inflow. The actuator line model is able to generate flow structures near the blades such as root and tip vortices which the actuator disk model does not, but in the far wake, the predicted mean wakes are very similar. In order to perform validation against experimental data, the actuator line model output was compared with data from the wind tunnel experiment conducted at the Norwegian University of Science and Technology, Trondheim. Agreement between measured and predicted power, wake profiles, and turbulent kinetic energy has been observed for most tip speed ratios; larger discrepancies in power and thrust coefficient, though, have been found for tip speed ratios of 9 and 12. Copyright © 2014 John Wiley & Sons, Ltd.
14
GENERAL CIRCULATION EXPERIMENTS WITH THE PRIMITIVE EQUATIONS
Joseph Smagorinsky · Monthly Weather Review · 1963 · 13.8K citations