Journal of Prosthodontics · 2010 · 62 citations · 57 references
DentistryDental Materials ScienceRestorative DentistryDental MaterialsMechanical Behavior Of MaterialsMechanical Properties Of Dental MaterialsAll-ceramic RestorationsCeramic RestorationsDental CementsDental CeramicsElastic PropertiesVeneer RestorationsBiomechanics Of Core RestorationsCement Layer ThicknessCeramic Crown SystemsDental CrownsStress DistributionStress Distribution In RestorationsTensile LoadingTensile Strength
PURPOSE: This study investigated the effects of luting cement type and thickness on the stress distribution within all-ceramic crowns using finite element analysis. MATERIALS AND METHODS: An all-ceramic crown restoration of the mandibular right first molar was prepared according to standard dental processes and scanned using micro-computed tomography. Eight 3D FE models were then developed that accounted for two adhesive systems, each with cement thickness of 60 μm, 90 μm, 120 μm, and 150 μm. The models were subjected to four loading conditions, and stresses in the veneer and core layers were evaluated. RESULTS: The stress distribution and maximum stresses in the veneer, core, and cement are presented in corresponding loading conditions. The cement with higher elastic modulus resulted in lower tensile stresses in the veneer and core layers, and the shear strength of the cement was critical to the intactness of the all-ceramic crown. CONCLUSION: The cement thickness acts as a cushion between the crown and dentin substrate. Although there is an optimal thickness (approximately 90 μm) that can reduce the stress level in ceramic crowns, cement thickness is not very important to stresses in the core or veneer in most cases when compared to the influence of loading conditions or cement moduli.
57
Microtensile bond strength between adhesive cements and root canal dentin
Serge Bouillaguet, Sabra Troesch, John C. Wataha et al. · Dental Materials · 2003 · 534 citations · Full text
Bonding effectiveness of adhesive luting agents to enamel and dentin
K. Hikita, Bart Van Meerbeek, Jan De Munck et al. · Dental Materials · 2006 · 445 citations
Dentistry, Dental Materials Science, Restorative Dentistry +9