Water Resources Research · 2005 · 354 citations · 45 references
Natural SciencesEarth SciencesGeophysicsReservoir CharacterizationSedimentologySubsurface Fluid FlowAquifer CharacterizationAquifer PropertiesElectrical Properties Of RocksGroundwater HydraulicsHydraulic ConductivityInduced PolarizationAquifer Hydraulic ConductivityAquifer Hydraulic PropertiesHydraulic Conductivity In SedimentsHydraulic Conductivity ParameterizationModel ParameterizationSpectral Induced PolarizationUnsaturated Hydraulic ConductivityUnsaturated Hydraulic Properties
Geophysical methods, especially induced polarization, are increasingly used to parameterize hydrological models, but current IP–hydraulic conductivity relationships are limited to sediments with minimal frequency dependence. The authors examined the spectral IP response of sandstone core samples from a UK aquifer and compared the measured parameters with their physical and hydraulic properties. They measured spectral IP responses of the samples and related the resulting parameters to the cores’ physical characteristics and hydraulic conductivity. The results demonstrate that existing IP–K models are inadequate due to frequency dependence, while the mean relaxation time τ correlates inversely with surface‑area‑to‑pore‑volume ratio, positively with hydraulic conductivity, reflects pore‑throat size, varies with fluid saturation, and therefore offers a promising frequency‑based parameter for groundwater flow modeling.
There is growing interest in the use of geophysical methods for hydrological model parameterization. Empirical induced polarization (IP)–hydraulic conductivity ( K ) relationships have been developed, but these are only applicable to sediments in which the IP response shows limited variation with electrical current frequency. Here we examine the spectral IP response of samples taken from a UK sandstone aquifer and compare measured parameters with physical and hydraulic properties. We demonstrate the limited value of existing IP‐ K models due to the inherent IP frequency dependence of these samples. Our results show how the mean relaxation time, τ, is a more appropriate measure of IP response for these sediments. A significant inverse correlation between the surface area to pore volume ratio and τ is observed, suggesting that τ is a measure of a characteristic hydraulic length scale. This is supported by a measured strong positive correlation between log τ and log K . Our measurements also reveal evidence of a relationship between τ and a dominant pore throat size, which leads to postulations about the parallelism between the spectral IP behavior and unsaturated hydraulic characteristics. Additional experiments show how the relaxation time is affected by degree of fluid saturation, indicating that saturation levels must be accounted for if our empirical relationships are applied to vadose zone studies. Our results show clear evidence of the potential value of frequency‐based IP measurements for parameterization of groundwater flow models.
45
Mineral discrimination and removal of inductive coupling with multifrequency IP
W. H. Pelton, S. H. Ward, Philip G. Hallof et al. · Geophysics · 1978 · 926 citations