Journal of Polymer Science Part B Polymer Physics · 2003 · 56 citations · 37 references
Natural SciencesMaterials EngineeringMaterials SciencePolymer ChemistryPolymer EngineeringPolymer MaterialsComposite MaterialsPolymer BlendsPolymer CharacterizationPolymer Phase BehaviorPolymer PhysicsPolymer StructureBlend CompatibilityBlendingImpact StrengthMelt BlendingPolymer Blend CompatibilizationPolymer BlendingTorqueToughened Polymers
Abstract Supertough poly(butylene terephthalate) (PBT)‐based blends were obtained by the melt blending of PBT with 0–30 wt % poly(ethylene‐ co ‐glycidyl methacrylate) (EGMA). The reaction between PBT and EGMA was detected by torque measurements. The particle size was almost constant with increasing EGMA content, and this indicated that compatibilization occurred. The minimum EGMA content for achieving supertoughness (i.e., an impact strength 16 times greater than that of PBT) was 20 wt %. The interparticle distance was the parameter controlling toughness in these PBT/EGMA blends. The dependence of the critical interparticle distance (τ c ) on the modulus of the dispersed phase appeared only at low τ c values, and the primary dependence of τ c on the ratio of the modulus of the matrix to the modulus of the rubbery dispersed phase was proposed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2236–2247, 2003
37
Encyclopedia of polymer science and engineering
C.S.H. Bawn · Polymer · 1987 · 4.2K citations
Natural Sciences, Materials Engineering, Materials Science +12