Fusion Technology · 1988 · 15 citations · 6 references
EngineeringMaterials EngineeringNuclear EngineeringFusion EngineeringNuclear MaterialsReactor PhysicsCeramic Nuclear MaterialsFusion Reactor MaterialsNuclear FusionReactor Core DesignReactor DesignTritium BreedingBeryllium Neutron MultipliersBlanket DesignBlanket MaterialsFusion Reactor EngineeringFusion Reactor PhysicsHelium Cooled Breeding BlanketsTritium Breeding BlanketsTritium Breeding Materials
AbstractThe use of beryllium as a neutron multiplier for fusion reactor blankets has been analyzed. The analysis has been performed based on designs for a helium-cooled ceramic breeder and a self-cooled liquid-metal blanket, which have both been suggested for the Next European Torus reactor. It is shown that the use of beryllium in a ceramic breeder blanket is best in a “sandwich-type” arrangement, where a beryllium block is embedded between a thin ceramic layer and the thick main breeding zone, or in a homogeneous mixture of beryllium and breeding ceramics. The sandwich-type solution needs only a minimum of beryllium inventory. Monte Carlo calculations show that heterogeneity effects in such a blanket are negligible. Therefore, the “homogeneous” solution can be achieved in a more heterogeneous arrangement like slabs of beryllium with the breeding ceramics in between.The use of beryllium also provides a benefit for liquid-metal blankets, using either LiPb or lithium metal as breeding material, since neutron multiplication and the tritium breeding ratio are enhanced in such a way that it is possible to reduce the blanket thickness considerably or to replace the inboard breeding blanket by a simple neutron reflector. It turns out that in such a blanket the use of lithium metal as breeding material is superior to that of LiPb.
6
Blanket Comparison and Selection Study
J.W. Davis, T.A. Lechtenberg, Dale Smith et al. · Fusion Technology · 1985 · 152 citations