Typical Dynamic Moduli for North Carolina Asphalt Concrete Mixes

Y Richard Kim, Mark King, Mostafa Momen

2005 · 10 citations · 0 references

Concepts

Abstract

This report presents results from an experimental study on the dynamic modulus testing of hot mix asphalts (HMAs) in uniaxial compression and indirect tension (IDT) modes. The study includes 42 mixtures that are commonly used in North Carolina and have varying aggregate sources, aggregate gradations, asphalt sources, asphalt grades, and asphalt contents. The procedures outlined in the AASHTO TP 62-03 Standard Method of Test for Determining Dynamic Modulus of Hot-Mix Asphalt Concrete Mixtures have been modified in this study by reducing the number of test temperatures from five to four and by increasing the number of loading frequencies. This modified four-temperature protocol resulted in a reduction of the testing time. The dynamic modulus database developed from the axial compression testing was used to evaluate the prediction accuracy of the two dynamic modulus predictive models that are currently available, i.e., the Witczak and Hirsch models. A case study was conducted to determine the effects of predictive errors on the fatigue cracking and rutting performance of HMA pavements. The database was also used to investigate the effects of different mixture variables on the dynamic modulus. It was found that the binder variables (i.e., the source, performance grade, and content) have a much more significant effect on the dynamic modulus than the aggregate variables (i.e., source and gradation). An analytical solution to determine the dynamic modulus, phase angle, and Poisson's ratio using the IDT test was developed using the theory of linear viscoelasticity. The resulting IDT dynamic modulus was found to be statistically the same as the dynamic modulus determined from the axial compression testing about 80% of the time. It was found that the amount of variability between replicates increases as the nominal maximum aggregate size (NMAS) increases. The digital image correlation (DIC) method, a noncontact, full-field displacement measurement technique, was employed to investigate the relationship between the displacement gauge length in the IDT test and the NMAS.