Zenodo (CERN European Organization for Nuclear Research) · 2013 · 15 citations · 0 references
EngineeringCivil EngineeringMaterials EngineeringBuilding MaterialsStructural EngineeringStructural MaterialsConcrete ConstructionConcrete MaterialsFiber-reinforced CompositesReinforced Concrete StructuresShear PropertiesShear StrengthNonlinear AnalysisPunching ShearPunching Shear Resistance
This paper deals with behavior and capacity of<br> punching shear force for flat slabs produced from steel fiber<br> reinforced self compacting concrete (SFRSCC) by application<br> nonlinear finite element method. Nonlinear finite element analysis on<br> nine slab specimens was achieved by using ANSYS software. A<br> general description of the finite element method, theoretical modeling<br> of concrete and reinforcement are presented. The nonlinear finite<br> element analysis program ANSYS is utilized owing to its capabilities<br> to predict either the response of reinforced concrete slabs in the post<br> elastic range or the ultimate strength of a flat slabs produced from<br> steel fiber reinforced self compacting concrete (SFRSCC). In order to<br> verify the analytical model used in this research using test results of<br> the experimental data, the finite element analysis were performed<br> then a parametric study of the effect ratio of flexural reinforcement,<br> ratio of the upper reinforcement, and volume fraction of steel fibers<br> were investigated. A comparison between the experimental results<br> and those predicted by the existing models are presented. Results and<br> conclusions may be useful for designers, have been raised, and<br> represented.