Welding Journal · 1989 · 32 citations · 0 references
EngineeringMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallurgyThermal AnalysisAlloysArc WeldingLaser Beam WeldingStainless SteelsWeldingWelding ProcessesFluid Flow AnalysisGas Tungsten Arc WeldingLaser Beam Welding SimulationLaser WeldingSurface Heat FlowWeld Pool BehaviorWeld SolidificationWelding Process Modeling
In part I of the paper, the results of the heat flow and the fluid flow analysis were presented. Here, in Part II of the paper, predictions of the computational model are verified by comparing the numerically predicted and experimentally observed fusion zone size and shape. Stationary gas tungsten arc and laser beam welds were made on Type 304 stainless steel for different times to provide a variety of solidification conditions such as cooling rate and temperature gradient. Calculated temperatures and cooling rates are correlated with the experimentally observed fusion zone structure. In addition, the effect of sulfur on GTA weld penetration was quantitatively evaluated by considering two heats of 304 stainless steel containing 90 and 240 ppm sulfur. Sulfur, as expected, increased the depth/width ratio by altering the surface tension gradient driven flow in the weld pool.