An Ultra-Low-Voltage CMOS Process-Insensitive Self-Biased OTA With Rail-to-Rail Input Range

Abstract

An operational-transconductance-amplifier (OTA) design for ultra-low voltage ultra-low power applications is proposed. The input stage of the proposed OTA utilizes a bulk-driven pseudo-differential pair to allow minimum supply voltage while achieving a rail-to-rail input range. All the transistors in the proposed OTA operate in the subthreshold region. Using a novel self-biasing technique to bias the OTA obviates the need for extra biasing circuitry and enhances the performance of the OTA. The proposed technique ensures the OTA robustness to process variations and increases design feasibility under ultra-low-voltage conditions. Moreover, the proposed biasing technique significantly improves the common-mode and power-supply rejection of the OTA. To further enhance the bandwidth and allow the use of smaller compensation capacitors, a compensation network based on a damping-factor control circuit is exploited. The OTA is fabricated in a 65 nm CMOS technology. Measurement results show that the OTA provides a low-frequency gain of 46 dB and rail-to-rail input common-mode range with a supply voltage as low as 0.5 V. The dc gain of the OTA is greater than 42 dB for supply voltage as low as 0.35 V. The power dissipation is 182 μW at V <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">DD</sub> =0.5 V and 17 μW at V <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">DD</sub> =0.35 V.