Journal of the Environmental Engineering Division · 1978 · 151 citations · 0 references
EngineeringChemical EngineeringSurface EngineeringSurface ScienceTransport PhenomenaAdsorption At InterfacesAdsorption ProcessesAdsorptive SeparationsModel CalibrationSurface AdsorptionTransport Property SimulationAdsorption IsothermsAdsorption KineticsAdsorption ModelingFixed-bed Adsorber DesignFixed-bed AdsorptionIsotherm ModelingMass Transfer CoefficientsSurface Diffusion Coefficients
The study develops a predictive mathematical model for fixed‑bed adsorber design that incorporates liquid and solid phase mass‑transfer resistances and provides numeric solutions, laying groundwork for future single‑ and multi‑component verifications. The model is formulated analytically, solved numerically, and calibrated using bench‑scale adsorption‑rate, isotherm, and surface‑diffusion measurements, with liquid‑phase mass‑transfer coefficients taken from literature correlations. Bench‑scale experiments successfully estimated model parameters and validated the model against break‑through profiles.
A predictive mathematical model for fixed-bed adsorber design which incorporates both liquid and solid phase resistances to mass transfer is formulated; numeric solutions are described and checked for accuracy. Laboratory bench scale studies used to estimate model parameters independently from adsorber break-through profiles are described, and experimental results presented. The bench scale tests involve both adsorption rate and isotherm measurements that are used to determine isotherm equation parameters and surface diffusion coefficients for model calibration. Liquid-phase mass transfer coefficients for fixed-bed operation are obtained from literature correlations; parameter values used for model calibration are presented. This paper sets the stage for single- and multi-component model verifications to be presented in two subsequent papers.