Standard load models for power flow and dynamic performance simulation

Unknown author(s)

IEEE Transactions on Power Systems · 1995 · 633 citations · 18 references

Concepts

TL;DR

Power system load modeling must be flexible, encompassing static types such as lighting, motors, and transformers, each of which can be represented by multiple models at a load bus. The paper aims to improve load modeling and enable data exchange across production‑grade simulation tools. The authors recommend using standard load models—including multiple load types connected to a load bus and LTC transformer models—for power flow, transient stability, long‑term dynamics, and small‑disturbance stability simulations.

Abstract

The authors recommend standard load models for power flow and dynamic simulation programs. The goal of this paper is to promote better load modeling and advanced load modeling, and to facilitate data exchange among users of various production-grade simulation programs. Flexibility of modeling is an important consideration. For transient stability, longer-term dynamics, and small-disturbance stability programs, the authors recommend the structure of multiple load types connected to a load bus. Load types are static including discharge lighting, induction motors, synchronous motors, and transformer saturation. For each load type, multiple models may be connected to the bus. For longer-term dynamics programs, a model for LTC transformers is also recommended.

References

18