Fatigue & Fracture of Engineering Materials & Structures · 2014 · 28 citations · 43 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsStructural MaterialsFatigueFracture CharacterizationFracture MechanicsFracture PropagationMechanical CharacterizationStress-strain BehaviorCrack GrowthCrack PropagationCracksFatigue Crack GrowthFatigue Crack PropagationFatigue FractureFracture SurfacesJ-integral
ABSTRACT The fatigue cracks growth rate of a forged HSLA steel (AISI 4130) was investigated using thin single edge notch tensile specimen to simulate the crack development on a diesel train crankshafts. The effect of load ratio, R , was investigated at room temperature. Fatigue fracture surfaces were examined by scanning electron microscopy. An approach based on the crack tip opening displacement range (ΔCTOD) was proposed as fatigue crack propagation criterion. ΔCTOD measurements were carried out using 2D‐digital image correlation techniques. J ‐integral values were estimated using ΔCTOD. Under test conditions investigated, it was found that the use of ΔCTOD as a fatigue crack growth driving force parameter is relevant and could describe the crack propagation behaviour, under different load ratio R .
43