Die Angewandte Makromolekulare Chemie · 1997 · 12 citations · 3 references
Natural SciencesMaterials EngineeringMaterials SciencePolymer EngineeringPolymer MaterialsWaste ManagementPlastic Waste ManagementPolymer DegradationPolymer Thin FilmsRadiation-resistant MaterialsThermoplastic PolymersThermosetsCrosslinked PolymersIonizing IrradiationPolyethylenePolymer Degradation Under RadiationPolymer Radiation DamageRadiation-resistant PolymersRadiation-tolerant PolymersTensile Strength
Abstract Polyethylene wastes (low‐density polyethylene, high‐density polyethylene and their binary blends) were subjected to high‐energy radiation, using a 60 Co gamma radiation source. The crosslinked materials thus obtained were processed to heatshrinkable films. Tensile strength could be sharply improved by increasing the dose up to 20 Mrad, simultaneously increasing the elongation at break of the most degraded PE waste. An increase of the degree of compatibility of LDPE and HDPE waste was also observed. All samples examined exhibit a “memory effect” after drawing at 130°C and cooling under tension followed by further heating under relaxed conditions. The value of shrinkage depended on the degree of degradation of the PE waste and on the irradiation dose.
3