SAE technical papers on CD-ROM/SAE technical paper series · 1987 · 45 citations · 10 references
EngineeringMechanical EngineeringHeat TransferThermodynamicsTransport PhenomenaBoiling Heat TransferEngine Heat TransferHeat FlowHeat Transfer AnalysisHeat Transfer FundamentalsHeat Transfer In FluidsBoilingCoolantCoolant BoilingCoolant Flow DynamicsFilm BoilingHeat Transfer MechanismsNucleate BoilingPressure Drop
<div class="htmlview paragraph">Measurements of heat transfer to water/ethylene glycol mixtures are reported for a range of coolant velocities (0.1 to 5.5 m/s) and heat fluxes (up to 140 W/cm<sup>2</sup>). At the highest velocities (3 and 5.5 m/s) forced convection was the dominant mode of heat transfer. At lower velocities, however, strong nucleate boiling occurred and at the lowest velocities dryout or vapour blanketing of the test section was detected. For most of the tests reported the pressure drop across the test section was held constant and the coolant flowrate adjusted accordingly. A number of tests are, however, reported for conditions of constant flowrate.</div> <div class="htmlview paragraph">The heat-transfer data obtained are shown to be in good agreement with a heat-transfer model that allows for forced convection and nucleate boiling.</div>
10
95/03868 Convective boiling and condensation
Fuel and Energy Abstracts · 1995 · 2.4K citations
I. C. Finlay, Danny Harris, D J Boam et al. · Proceedings of the Institution of Mechanical Engineers Part D Transport Engineering · 1985 · 31 citations
Engineering, Automotive Engineering, Mechanical Engineering +17