Nuclear Technology · 2013 · 16 citations · 26 references
EngineeringNuclear EngineeringHeat TransferNuclear MaterialsReactor PhysicsPacked Bed FlowPacked Bed ReactorsHeat Transfer CharacterizationHeat Transfer In Packed BedsHeat Transfer MechanismsPacked-bed Reactor HydrodynamicsPacking FractionParticle Packing FractionPebble-bed ReactorsThree-dimensional Tomography
In pebble bed-type nuclear reactors, the fuel pebbles form a randomly stacked bed with a nonuniform packing density. To investigate flow and heat transfer through these beds and to develop realistic models, we need a good understanding of the nature of randomly stacked beds and validated computational methods that can generate realistic beds. To this end, the average packing fraction (PF) and the radial and axial PF profiles were accurately measured of a bed containing 5400 acrylic pebbles with a diameter of 12.7 mm. In a second experiment, we determined the pebble locations of a bed containing 8900 glass pebbles with diameters of 1.66 to 2.00 mm using three-dimensional X-ray tomography, from which various microscopic stacking properties were evaluated for both the bulk of the bed away from the wall and in the near wall region. Results were compared with the properties of a bed that was generated by using a computational method based on the removal of overlaps to validate that method.Results for the computed bed are in good agreement with the experiments and with the literature, giving confidence that the method is capable of generating beds with realistic packing structures, although the experimental results for the microscopic stacking properties in the near-wall region are of insufficient quality for a meaningful comparison. Analysis of the various results shows different stacking properties near the wall than in the bulk of the bed, indicating the stacking is anisotropic near a boundary forming semiordered layers parallel to the wall with hexagonal-like stacking properties, which implies flow and heat transfer might also be isotropic near the wall and could need different models near the wall than in the bulk to be accurately described. Finally, the probability distribution of PFs of small clusters of around 45 pebbles showed that the local PF inside a packed bed can vary strongly, both in the bulk and near the wall, which might significantly affect flow rates and could result in hot spots.
26
The density of random close packing of spheres
G. D. Scott, D M Kilgour · Journal of Physics D Applied Physics · 1969 · 740 citations
Void fraction distribution in beds of spheres
R. Benenati, C. B. Brosilow · AIChE Journal · 1962 · 658 citations
The design features of the HTR-10
Zongxin Wu, Dengcai Lin, Daxin Zhong · Nuclear Engineering and Design · 2002 · 366 citations
Analysis of granular flow in a pebble-bed nuclear reactor
Chris H. Rycroft, Gary S. Grest, James W. Landry et al. · Physical Review E · 2006 · 352 citations · Full text
Engineering, Nuclear Engineering, Computational Fluid Dynamics +16