Allowable Charge Calculation Method for Flammable Refrigerants

Osami Kataoka, Michito Yoshizawa, Taku Hirakawa

Purdue e-Pubs (Purdue University System) · 2000 · 16 citations · 0 references

Full text

Open access

Concepts

TL;DR

Flammable refrigerants such as hydrocarbons and low‑GWP HFCs are preferred for climate reasons, yet existing standards sometimes fail to prevent ignition and their theoretical basis remains unclear. The study aims to establish a more scientific method for calculating the allowable refrigerant charge to support a better standard. A simple formula was derived from experimental data and CFD simulations to serve as the basis for a new international standard. The paper includes a comprehensive nomenclature of symbols and terms used in the calculation.

Abstract

Although hydrocarbons and lower GWP HFCs are flammable, they are preferable to high GWP HFCs from the perspective of mitigating climate change. Appropriate standards are necessary to utilize these refrigerants so that their flammability risks are minimized. Although standards for the use of flammable refrigerants exist, some reports indicate that the refrigerants can sometimes be ignited even at levels which satisfy the standards. In addition, the theoretical background of these standards is unclear. To promote the development of a more appropriate standard, a more scientific method for calculating the allowable refrigerant charge was established. Because the calculation method was proposed as the foundation for a new international standard, a relatively simple formula was developed, based on experimental and numerical (CFD) analyses. NOMENCLATURE CFD; Computational Fluid Dynamics h1; Effective height in 7m 2 room [m] GWP; Global Warming Potential K; Coefficient for adjusting charge amount HFC; Hydrofluorocarbons other than propane HCs; Hydrocarbons LFL; LFL in we1gm L kg/m] UFL; Upper Flammable Limit mmax; Allowable charge [kg] LFL; Lower Flammable limit t; Leak duration [minutes] A; Floor area [ m] x; Height from the floor [ m] h; Effective Height [m] y; Concentration of refrigerant [kg!m] h0 ; Leak height (Installation Height) [m]