HAL (Le Centre pour la Communication Scientifique Directe) · 2011 · 20 citations · 11 references
Open access
EngineeringBioengineeringBioenergeticsEnergy SystemsPower ElectronicsBioenergy SystemsDc-dc ConvertersEnergy ConversionFuel CellsMicrobial BiofuelsConvertersDc-dc Converter TopologiesEnergy HarvestingEnergy Harvesting SystemsFeedbackLow-power Dc-dc ConversionMicrobial Fuel CellsPower Generation
This paper describes and evaluates 3 original step-up converter architectures able to harvest energy from low-voltage and low-power generators. Design and sizing are made according to specifications issued from the stringent characteristics of microbial fuel cells. The maximum harvested power is 10mW under input voltage Vin=0.3V (33mA input current). The considered converters include selfoscillating circuits for autonomous operation. The 2 first topologies are respectively adapted from boost and flyback topologies. The 3 rd topology uses a Greinacher voltage-lift circuit. Energy is transferred to the load both directly (forward transfer) and indirectly (flyback transfer). PSPICE simulations enable evaluation and comparison of the 3 topologies in term of efficiency, robustness, step-up ratio, control and cost. Best efficiency of 80.6 % is achieved by the boost-derived circuit which also enables a feedback action to harvest energy at maximum power point.
11
Ruud Vullers, R. van Schaijk, Inge Doms et al. · Solid-State Electronics · 2009 · 869 citations
Modelling and simulation of two-chamber microbial fuel cell
Yingzhi Zeng, Yeng Fung Choo, Byung Hong Kim et al. · Journal of Power Sources · 2009 · 201 citations