Analysis of the Influence of Valve Geometric Parameters on the Effective Flow and Force Areas

Tiago Simão Ferreira, J. Lainor

Purdue e-Pubs (Purdue University System) · 1986 · 32 citations · 10 references

Full text

Open access

Concepts

Abstract

The effective flow and force areas of valves are important parameters for the numerical simulation of reciprocating hermetic compressors, which is a fundamental step in the optimization process. This work analyzes the effects of the independent variation of different geometric dimensions of hermetic compressor valves on the effective flow and force areas using a circular valve plate, such as valve disc diameter, valve seat step height, valve seat step radius, valve port length, entrance port radius, exit port radius, entrance port conicity and exit port conicity. The results are presented in dimensionless form using some characteristic parameters. The flow Reynolds number is kept constant when the valve separation is varied. It is also presented the analysis of the different flow regimes which are encountered when the valve disc is separated from the seat and a detailed description of the experimental setup as well. INTRODUCTION The variation of the thrust force on the reed with the valve lift may lead to vibrations and valve flutter, particularly in connection with a valve spring. This behavior is undesirable in valves design. Different valve, port and seat geometries affect the effective flow area and the effective force area. Those parameters are needed for the numerical simulation of hermetic compressors and they can also be used to evaluate the expected performance of a compressor valve. This paper presents the experimental results of the effective

References

10