A 3-D Printed Lightweight X-Band Waveguide Filter Based on Spherical Resonators

Abstract

A fifth order X-band waveguide bandpass filter, based on spherical resonators, has been designed, and fabricated by 3-D printing. In comparison with rectangular waveguide, spherical resonators have a higher unloaded quality factor, but at the same time suffer from closer higher order modes. In this letter, a special topology has been proposed to relieve the impact of the first three higher order modes in the resonator and ultimately to achieve a good out-of-band rejection. Stereolithography based 3-D printing is used to build the filter structure from polymer and a 25 μm thick copper layer is deposited to the filter. The measurement result of the filter has an excellent agreement with the simulations. The filter is also considerably lighter than a similar metal filter.