Purdue e-Pubs (Purdue University System) · 2000 · 13 citations · 2 references
Open access
EngineeringComputational EngineeringComputational Fluid DynamicsDesign OptimizationFluid DynamicsAerodynamic DesignCompressible FlowPneumatic SystemsCompressionCompressor AerodynamicsCompressor PerformanceCompressor SystemsCompressorsNoise GenerationPressure LossesPressure Losses In Ducts
Heat and mass transfer processes are of paramount importance when designing some important compressor components, specially the ones that peiform flow control, noise suppression and the compression process itself In general, pressure losses, flow pulsation and heat exchanges must be minimized to achieve high efficiencies.On the other hand, the optimization of those parameters are subject to a compromise with noise generation, component manufacturing costs and reliability, hence the bigger is the amount of iriformation available, the higher is the probability of a successful project.In this scenario, the use of Computational Fluid Dynamics (CFD) plays an important role in the development phase, since it allows the analysis of more options, faster and at lower expenses comparing to the "prototype-and-test" approach.It also spreads possibilities of alternatives prone to be considered in a technical trade-off and anticipates problems and design constrains prior to prototyping.This paper focus on designing problems and case studies solved using CFD.Problems are described in terms of the approach used in the solution, boundary conditions, models adopted and results obtained NOMENCLATURE ArEffective flow area Patm Atmospheric pressure Aw Effective force area r Pressure ratio (Patm I Pu) d Valve port diameter R Gas constant F Force on the reed valve s Reed valve displacement relative to its seat k Specific heat ratio Tu Flow temperature upstream the valve port m Mass flow rate through the valve port Apv Pressure difference on the valve Pu Flow pressure upstream the valve port
2