Surface Engineering · 2015 · 30 citations · 37 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsMetallurgyAlloysMetallurgical KineticsMetalsPhysical MetallurgySteel MaterialsWear ResistanceActivation EnergyDiffusion CoefficientsDry SlidingIndentation MechanicsKinetic Model IdentificationSteel MetallurgyWear Resistance Of SteelsX-ray Diffraction Analysis
In this work, American Iron and Steel Institute (AISI) O1 steel was pack borided in the temperature range of 1123–1273 K for treatment times between 2 and 8 hours. A kinetic model was proposed for estimating the boron diffusion coefficients through the Fe 2 B layers. As a result, the boron activation energy for the AISI O1 steel was estimated as 197·2 kJ mol − 1 . This value of energy was compared to the literature data. In addtion, to extend the validity of the present model, two additional boriding conditions were done. The Fe 2 B layers grown on AISI O1 steel were characterised by use of the following experimental techniques: scanning electron microscopy, X-ray diffraction analysis and Daimler-Benz Rockwell-C indentation technique. Finally, the scratch and pin on disc tests for wear resistance were respectively performed using an LG Motion Ltd and a CSM tribometer under dry sliding conditions.
37
Sliding and abrasive wear behaviour of boride coatings
Carla Martini, G. Palombarini, Giorgio Poli et al. · Wear · 2003 · 218 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +14