Deployable controllable geometry truss beam

Abstract

A study was conducted on a truss beam structural concept that can deploy and maneuver in a serpentine manner to align or position the truss beam tip. The truss beam is composed of a series of rod members connected together at joints that provide the required rotational degrees of freedom. The current study was conducted to evaluate the requirements of the joints and define a mechanical assembly that could provide both high structural stiffness and the required maneuverability. The truss beam requires two joint types; both types were fabricated and incorporated in a demonstration model. An analysis of the concept was performed to define the location and orientation of the beam tip during deployment and serpentine maneuvers.