SAE technical papers on CD-ROM/SAE technical paper series · 2003 · 36 citations · 11 references
EngineeringChemical EngineeringEnvironmental EngineeringAir PollutionCatalysisReaction EngineeringCatalyst DesignCatalyst RegenerationCatalytic Reaction EngineeringCatalytic Reactor DesignDiesel TechnologyParticulate MatterCatalyst Design PrinciplesCatalyst Regeneration DesignDiesel CycleDiesel EnginesDiesel Exhaust ParticlesDiesel Oxidation CatalystsFilter Performance ModelingRegeneration Performance Monitoring
<div class="htmlview paragraph">A one-dimensional model simulating the oxidation of CO, HC, and NO was developed to predict the gaseous emissions downstream of a diesel oxidation catalyst (DOC). The model is based on the conservation of mass, species, and energy inside the DOC and draws on past research literature.</div> <div class="htmlview paragraph">Steady-state experiments covering a wide range of operating conditions (exhaust temperatures, flow rates and gaseous emissions) were performed, and the data were used to calibrate and validate the model. NO conversion efficiencies of 50% or higher were obtained at temperatures between 300°C and 350°C. CO conversion efficiencies of 85% or higher and HC conversion efficiencies of 75% or higher were found at every steady state condition above 200°C. The model agrees well with the experimental results at temperatures from 200°C to 500°C, and volumetric flow rates from 8 to 42 actual m<sup>3</sup>/min. The estimated activation energies and pre-exponential factors obtained from the model calibration are in good agreement with values reported in the literature.</div> <div class="htmlview paragraph">An analytic pressure drop model was used to estimate the pressure drop across the DOC channels, and agreement within 8 % of the experimental data was obtained. This model can be used to predict the pressure drop across the DOC from various displacement engines.</div> <div class="htmlview paragraph">Cycle weighted emissions were collected with and without the DOC using the ISO-8178 8-mode test. The cycle weighted CO and HC conversion efficiencies were over 90% and 86% respectively. The DOC had minimal effect on the total NOx emissions.</div>
11
Sowmyanarayanan Sadagopan · Ubiquity · 2002 · 1.4K citations
Fundamental Studies of Diesel Particulate Filters: Transient Loading, Regeneration and Aging
Athanasios G. Konstandopoulos, Margaritis Kostoglou, Evangelos Skaperdas et al. · SAE technical papers on CD-ROM/SAE technical paper series · 2000 · 454 citations
Engineering, Chemical Engineering, Environmental Engineering +16
Se H. Oh, James C. Cavendish · Industrial & Engineering Chemistry Product Research and Development · 1982 · 363 citations