2015 · 22 citations · 14 references
ComputingComputer EngineeringComputer ScienceComputer NetworksLow-power DesignWireless CommunicationsNetwork Performance AnalysisPower ManagementSensor NetworksWireless Communication ProtocolsWireless NetworksWireless Sensor NetworksCommunication Protocol StacksCommunication StacksEnergy ConsumptionEnergy-efficient Communication ProtocolsEnergy-efficient ProtocolsLow-power NetworkingPower ConsumptionPower Consumption Modeling
This paper presents a simple but still powerful approach for the analysis of the average power consumption of a sensor node using the IPv6 over Low power and Lossy Networks (LLN) stack, which is one of the most widely adopted and promising communication stacks. Power consumption is broken down according to the node states (i.e. CPU, IRQ, LPM, Tx, Rx) and according to the network protocols (e.g. CoAP, RPL, 6LoWPAN, Contiki MAC), identifying the relative weight of each protocol in the total energy consumption for several configurations. Results show that the Low Power Listening (LPL) mechanism of the radio duty cycling layer and RPL control messages have the highest impact on the total energy consumption, while the application's report rate has a very low impact for periods over 60 seconds.
14
Telos: enabling ultra-low power wireless research
2005 · 1.8K citations
Engineering, Computer Engineering, Electrical Engineering +16
Energy-aware wireless microsensor networks
Vijay Raghunathan, Curt Schurgers, Sung Min Park et al. · IEEE Signal Processing Magazine · 2002 · 1.7K citations