American Water Works Association · 1994 · 53 citations · 9 references
EngineeringEnvironmental EngineeringEnvironmental SciencesBioreactor DesignWastewater TreatmentWater TreatmentBiodegradationBiological Treatment ProcessesDrinking Water TreatmentOrganic Contaminant RemediationOrganic Contaminant RemovalWastewater BiotreatmentBiological TreatmentBiological Wastewater TreatmentChlorinationChlorination ByproductsLimited Data SetsOrganic Matter DegradationOrganic Matter RemovalRemoval
The good linear relationships obtained between influent concentration and removal rate for all parameters tested confirm that removal of biodegradable organic matter during biological drinking water treatment can be approximated by a first‐order model. Using data from two pilot‐scale studies and one full‐scale investigation, this article demonstrates that the removal rate in biological water treatment is proportional to the influent concentration to the bioreactor, i.e., a first‐order process. This is true not only for measures of biodegradable organic matter, e.g., assimilable organic carbon, but also for precursors of chlorination by‐products such as trihalomethanes. The slope of the removal rate versus the influent concentration relationship is termed the average specific removal rate, r AS . When data were available from different studies, the r AS values tended to fall in the same range. With a first‐order model, the performance of biological treatment in a given situation can be estimated from limited data. The model is suggested as an approach for the preliminary design of bioreactors for drinking water treatment.
9
Model of steady‐state‐biofilm kinetics
Bruce E. Rittmann, Perry L. McCarty · Biotechnology and Bioengineering · 1980 · 416 citations
A model of substrate utilization by bacterial films.
Kenneth Williamson, Perry L. McCarty · PubMed · 1976 · 366 citations