Research Repository (Delft University of Technology) · 2010 · 19 citations · 0 references
Open access
EngineeringEnvironmental EngineeringEnvironmental SciencesMetallurgyMineralogyWastewater TreatmentExtractive MetallurgyHeavy Metal RemediationIndustrial MineralsIndustrial PollutionMetal RecoveryWaste GenerationAluminium AlloysAluminium ContaminationAsh RecoveryChemical Properties Of Industrial MineralsCoal Ash CompositionCoal Mineral MatterLeachingZeolites
Minerals that are extracted from the earth’s crust to be directly used for their properties are called industrial minerals. This research shows that such minerals can also be produced from industrial residues, hence the name secondary industrial minerals. In this thesis coal fly ash is chosen as one of the industrial residues to work with. Since reuse of coal fly ash is restricted by its technical and environmental quality, the first approach was to improve its quality and thereby extend its applications. Significant fractions of heavy metals were removed from the ash by chemical extraction, but full compliance with leaching regulations could not be obtained. Since this method is tedious and costly and polluted effluents result, this is not the way to do it. A waste solution from the aluminium anodising industry is the other residue and is used as precursor for the synthesis of industrial minerals. Zeolites, dawsonite, ettringite and hydrotalcite were successfully synthesised from these effluents by using common other raw materials. This recovers most of the aluminium and other raw materials that would be otherwise lost and pollute the environment. The resulting effluents have pollutant concentrations below the accepted discharge levels. Zeolites can as well be synthesised by conversion of fly ash, however this yields mixtures of zeolites and ash. By extracting silica and alumina from fly ash and adding extra aluminium from the anodising waste solutions, commercial interesting zeolites could be synthesised with almost no input of primary raw materials. Another way of using both industrial residues together is the production of inorganic polymers, often referred to as geopolymers. Geopolymers with compressive strength of over 100 MPa were first made by activation of fly ash with potassium hydroxide and silicate solutions. Moreover, it is demonstrated that activation can also be done by using the aluminium anodising waste solutions. In this way an ‘all-waste’ geopolymer immobilising all hazardous components from its precursors is produced. The research shows that the production of secondary industrial minerals is an appropriate approach to simultaneously recover valuable materials from industrial residues, save primary resources and decrease emissions to the environment.