Journal of Cellular Plastics · 1999 · 12 citations · 10 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsPolymer EngineeringPolymer MaterialsDamage MechanicsDuctilityFracture MechanicsFracture ToughnessPolymer FoamsStrain HardeningCracksFoam DensityFoamsGas Pressure EffectsImpact ForceImpact ResponsePlastic Deformation BehaviorPolystyrene Foams
Polystyrene bead foam mouldings were impacted with a hemispherical striker of radius equal to the moulding thickness. Localised densification was observed below the contact area. A number of annular cracks initiated at bead boundaries at the moulding surface; the inner one grew most and limited load spreading. The extent of the main crack is determined by the yielded zone size. The impact force versus deflection response was predicted considering the vertical compressive stresses and the gas-pressure hardening of the foam. This gave good predictions for all but the 80 kg m -3 density foams, where hardening is mainly due to plastic deformation of the polymer.
10
Protective capability of bicycle helmets.
N. J. Mills · British Journal of Sports Medicine · 1990 · 44 citations · Full text