SAE technical papers on CD-ROM/SAE technical paper series · 2002 · 76 citations · 3 references
EngineeringAutomotive EngineeringChemical EngineeringInternal Combustion EnginesPowertrain EngineeringEngine DesignEngine EfficiencyEngine ModelingEngine PerformanceEngine Performance CharacteristicsEngine TestingDirect Fuel InjectionDirect InjectionEngine Performance AnalysisFuel InjectionGasoline Direct InjectionPort InjectionVolumetric Efficiency
<div class="htmlview paragraph">A study has been undertaken with a single-cylinder engine, based on the Mitsubishi GDi combustion system, that has the option of either port injection or direct injection. Tests have been undertaken with pure fuel components (methane, iso-octane, toluene and methanol), and a representative gasoline that has also been tested with the addition of 10% methanol and 10% ethanol. The volumetric efficiency depends both on the fuel and its time and place of injection. For stoichiometric operation with unleaded gasoline, changing from port injection to direct injection led to a 9% increase in volumetric efficiency, which was improved by a further 3% when 10% methanol was blended with the gasoline.</div> <div class="htmlview paragraph">The improvements in volumetric efficiency will be used to quantify the extent of charge cooling by fuel evaporation, and these will be compared with predictions assuming the maximum possible level of fuel evaporation.</div>
3
William Anderson, Jia Yang, Diana D. Brehob et al. · SAE technical papers on CD-ROM/SAE technical paper series · 1996 · 140 citations