Optics Express · 2015 · 152 citations · 31 references
Natural SciencesPhysicsOpticsOptoelectronicsPhotonicsFiber OpticsLaser OpticsLaser PhysicsNonlinear OpticsOptical FibersOptical SourcesHeat Source IdentificationLaser Beam QualityPhotodarkeningPower OutputRadiation LossThermal Effects In Photonic DevicesThreshold BehaviorWavelength Scaling
The threshold-like onset of mode instabilities is currently the main limitation for the scaling of the average output power of fiber laser systems with diffraction limited beam quality. In this contribution, the impact of a wavelength shift of the seed signal on the mode instability threshold has been investigated. Against expectations, it is experimentally shown that the highest mode instabilities threshold is reached around 1030 nm and not for the smallest wavelength separation between pump and signal. This finding implies that the quantum defect is not the only source of thermal heating in the fiber. Systematic experiments and simulations have helped in identifying photodarkening as the most likely second heat source in the fiber. It is shown that even a negligible photodarkening-induced power loss can lead to a decrease of the mode instabilities threshold by a factor of two. Consequently, reduction of photodarkening is a promising way to mitigate mode instabilities.
31
César Jáuregui, Jens Limpert, Andreas Tünnermann · Nature Photonics · 2013 · 1.2K citations
Ytterbium-doped fiber amplifiers
R. Paschotta, Johan Nilsson, A.C. Tropper et al. · IEEE Journal of Quantum Electronics · 1997 · 827 citations
Femtosecond fiber CPA system emitting 830 W average output power
Tino Eidam, Stefan Hanf, Enrico Seise et al. · Optics Letters · 2010 · 603 citations
Mode instability in high power fiber amplifiers
Arlee V. Smith, J. Joshua Smith · Optics Express · 2011 · 474 citations · Full text