SAE technical papers on CD-ROM/SAE technical paper series · 1998 · 23 citations · 17 references
EngineeringAutomotive EngineeringChemical EngineeringCatalysisCombustionInternal Combustion EnginesCatalyst DesignCatalyst StabilityCatalytic MaterialsCatalytic Reaction EngineeringEngine DesignEngine PerformanceAir InjectionCatalyst DurabilityCatalyst Performance EvaluationEmission Limit StandardsEmission Rate StandardsEmission StandardsPrice FluctuationsTransition Metal Catalysts
<div class="htmlview paragraph">The present paper describes the results of a joint development program focussing on a system approach to meet the proposed EURO III and IV emission standards for a passenger car equipped with a 3.2 liter, 18 valve gasoline engine. Starting with the in-production configuration of a EURO II certified vehicle (model year 1997) the following improvement points were investigated in detail.</div> <div class="htmlview paragraph">By the introduction of a close-coupled catalyst in combination with engine measures to improve the catalyst light-off the proposed EURO III limits were met. The proposed EURO IV hurdle could be overcome by further using secondary air injection during cold-start in combination with an increased precious metal loading for the close-coupled catalyst.</div> <div class="htmlview paragraph">In order to take care of the precious metal resources and to become more independant of precious metal price fluctuations, a new developed catalyst coating with an improved activity characteristic after high temperature aging on an engine and on a vehicle was introduced. Furthermore, the application of engine and catalyst measures are described to obtain a better catalyst durability by reducing the catalyst bed temperature during full load engine operation.</div> <div class="htmlview paragraph">Future development work will mainly focus on the optimization of the precious metal content including an OBD-control function to monitor the catalyst activity.</div>
17
Reduced Cold-Start Emissions Using Rapid Exhaust Port Oxidation (REPO) in a Spark-Ignition Engine
Michael E. Crane, Robert H. Thring, Daniel J. Podnar et al. · SAE technical papers on CD-ROM/SAE technical paper series · 1997 · 37 citations
Engineering, Automotive Engineering, Mechanical Engineering +15