A Further Study of Inconsistencies between Autoignition and Knock Intensity in the CFR Octane Rating Engine

Abstract

<div class="htmlview paragraph">Careful consideration of the development and operation of the ASTM knock detection system on the Cooperative Fuels Research (CFR) octane rating engine has shown that the pressure fluctuations, brought about by autoignition of the end-gas, do not contribute to measurement of knock intensity. The analyses of a variety of fuels at standard knock intensity revealed that knock intensity measured on the CFR engine is related to the rate of change of pressure prior to knocking and is consistent with the description and operation of, not only the original bouncing pin, but also the modern day electronic CFR knock measurement system. It was concluded that the use of octane number data to directly infer information about the autoignition behaviour of fuels should be done with caution.</div>