NASA Technical Reports Server (NASA) · 1981 · 20 citations · 0 references
EngineeringAerospace EngineeringMechanical EngineeringAerodynamicsAircraft DesignAircraft StructuresAerodynamic DesignAircraft Configuration DesignWing AerodynamicsWing DesignWing StructuresWing TheoryAircraft Aerodynamic DesignAirfoil DesignFlow Around AirfoilsHigh-aspect-ratio Wing StructuresLaminar Flow AirfoilsSubsonic CruiseWing Aspect RatioWing Aspect Ratio Effects
Higher wing aspect ratios in subsonic aircraft affect performance differently for strut‑braced versus cantilever configurations. The study presents a method to assess attainable natural laminar flow and to conduct preliminary structural and aerodynamic analyses of wing‑lifting struts. The analysis compares configurations with identical payloads and fuel, using laminar‑flow airfoils to improve drag characteristics, and evaluates lift‑strut effects. An optimum cantilever wing with AR≈26 yields a 19% range increase, while an optimum strut‑braced wing with AR≈28 yields a 31% increase, mainly due to lower wing weight from lifting struts.
The effect of increased wing aspect ratio of subsonic aircraft on configurations with and without strut bracing. Results indicate that an optimum cantilever configuration, with a wing aspect ratio of approximately 26, has a 19% improvement in cruise range when compared to a baseline concept with a wing aspect ratio of approximately 10. An optimum strut braced configuration, with a wing aspect ratio of approximately 28, has a 31% improvment in cruise range when compared to the same baseline concept. This improvement is mainly due to the estimated reduction in wing weight resulting from use of lifting struts. All configurations assume the same mission payload and fuel. The drag characteristics of the wings are enhanced with the use of laminar flow airfoils. A method for determining the extent of attainable natural laminar flow, and methods for preliminary structural design and for aerodynamic analysis of wings lifting struts are presented.